A burst supply line, an overflowing tub, or a storm surge under the back door doesn't wait for business hours, and neither do we. Hirex Water Damage sends licensed technicians straight to your New Albany address with extraction equipment already loaded and running.
Hirex Water Damage started because homeowners in New Albany, MS kept telling us the same story: a national hotline picked up, put them on hold, and then subcontracted the job out to whoever was cheapest and closest. Every technician on our New Albany roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Our crew leads carry IICRC water restoration certifications and have logged real hours on Category 1, 2, and 3 losses, so Flood Damage Repair in New Albany isn't a side service we tacked on — it's the reason the company exists. We're fully insured and licensed to work anywhere in New Albany, MS, so you're protected from the moment our truck pulls into the driveway.
We keep a stocked warehouse inside New Albany, MS so equipment never has to be trucked in from another region, which is the difference between a 45-minute arrival and a next-day one.
Anyone in New Albany who has had a supply line fail overnight knows the real cost isn't the leak itself, it's how long the standing water sits before someone with the right equipment arrives. That's the gap Hirex Water Damage was built to close, one New Albany call at a time.
Water damage doesn't always look dramatic at first — some of the costliest New Albany jobs we've handled began as a small, easy-to-miss problem. Here's what tells us a property needs professional attention rather than a mop and a fan:
Recognizing one of these signs early is the difference between a contained repair and a gutted room, so call our New Albany team and get a straight answer on how urgent it is.
We size the New Albany response to the actual damage — a single-room extraction gets a two-person crew, a commercial loss gets the full fleet — nothing gets a cookie-cutter response.
Our New Albany units run truck-mount extraction pumps that pull thousands of gallons per hour, cutting standing-water time from days to hours. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
Once water is out, we bring in commercial air movers and LGR dehumidifiers, positioned using psychrometric readings rather than guesswork, with daily drying logs so you can see the numbers improving, not just take our word for it.
For New Albany homeowners, that means drywall removal at the flood cut line, subfloor assessment, and content pack-out for anything that can be saved, with clear photo documentation at every stage for your insurance claim.
For commercial New Albany accounts, we assign a project lead, run crews after normal hours to reduce downtime, and bring equipment sized to the actual footprint — we know a flooded lobby or a leaking unit above tenants below has to move fast.
When a New Albany job involves sewage backup, our team suits up in full PPE, applies EPA-registered antimicrobials, and safely disposes of porous materials that can't be saved.
We apply antimicrobial treatment during every New Albany drying job specifically to head off mold before it starts, and we'll flag any area that needs deeper remediation.
You get a written estimate before any equipment runs, not a mystery total handed to you after the fact.
Because our equipment cache sits inside New Albany, MS, most New Albany calls see a technician on-site in under 60 minutes.
We photograph and log every step specifically so your claim moves faster and you're not the one arguing with the insurance company.
If moisture readings aren't where they should be at the end of the job, we come back and keep drying at no extra charge.
A short call with our New Albany dispatcher tells us whether this is a one-room job or a multi-crew response before anyone drives out.
Our nearest available New Albany crew is dispatched immediately with truck-mount extraction gear on board.
Standing water comes out first; drying equipment gets placed only after we've mapped exactly where moisture is hiding.
Daily moisture checks continue until every affected material reads dry, and you get a complete report at the end.
We measure moisture with instruments, not guesswork, and we won't sign off on a New Albany job until those readings match the dry standard for the materials involved. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
You'll find that exact commitment printed on your New Albany paperwork, not just mentioned over the phone. We try to send the original technician back for any follow-up so you're not re-explaining the job to someone new.
"Our water heater let go at midnight and a Hirex Water Damage tech was pulling water out of the hallway by 1am. Fast doesn't begin to cover it." — Danielle R.
"They dealt with my insurance adjuster directly and I didn't have to translate a single restoration term myself." — Marcus T.
"Appreciated getting real numbers each day instead of someone just saying 'looks good' and packing up." — Priya S.
"A supply line failure flooded our kitchen and this crew had us reopened in under a week — much faster than we expected." — Aaron W.
"Nobody wants to call about a sewage backup, but they walked me through the containment and PPE process calmly." — Lena G.
"The quote matched the final invoice exactly. No surprise charges tacked on at the end." — Sam O.
Most New Albany dispatches are on-site within 60-90 minutes since our crews and equipment are based in-state, not flown or trucked in from elsewhere.
We always quote first. You'll see a written estimate for the New Albany job before any drying equipment starts running.
Our New Albany on-call rotation covers water extraction, drying, and blackwater cleanup any hour of the day or night.
We build our paperwork specifically to match what adjusters need and will speak with your insurer on your behalf.
We rely on moisture meters and psychrometric readings, not a guess, before signing off on a New Albany job as complete.
Blackwater and sewage response is a core part of what our New Albany team does, not a job we sub out.
Cut power to the affected area if there's standing water near outlets, and avoid walking through it until our New Albany tech confirms it's safe.
We scale crews and equipment for commercial New Albany accounts and assign a dedicated project lead for anything beyond a single unit.
Typical drying time runs 3-5 days for a New Albany home, though a job that sat unaddressed longer can take longer to fully dry.
Mold isn't inevitable, but the window to prevent it is narrow, which is why we treat speed as part of the New Albany service, not an upsell.
Yes, if moisture readings aren't at dry standard when we finish, or a callback shows lingering moisture within 30 days, we return at no extra charge.
Our New Albany coverage extends through the zip codes shown here and into nearby New Albany, MS communities.
New Albany is our home base, and our reach extends across New Albany, MS through a network of staged equipment and on-call technicians. If your address falls inside or near New Albany, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for New Albany, New Albany, MSOne call gets you a New Albany-based team, not a routed national queue.
Call +1-844-234-5373